How To Install Elecamera-E5

1 Wall Mounted Installation Instructions

    

Fix the solar panel and the bracket together by hexagonal wrench, and adjust it to the maximum sunlight orientation according to the installation environment.

 Connect the solar panel charging port.

Use screws to secure the iron wall bracket on the wall, hang the camera from top to bottom, finally lock the tamper-proof screws below.

2  Ceiling Mounted Installation Instructions 

Unscrew the fixing screw at A,

and then pull out the upper wall bracket.

 Put the upper wall bracket upright, insert it along the rail and fix the screws.

     

   

After adjusting the tilt angle of the wide-angle camera, tighten the thumbscrew to fix the lens position.

According to monitoring requirements, manually adjust the up and down tilt angle of the wide-angle camera.

You can manually adjust the angle of the white light on both sides, the recommended angle is 15 degrees downward tilt.

Adjust the angle of the solar panel to achieve the maximum sunlight. The recommended orientation is 25 degrees inclination.

The horizontal direction of the upper wide-angle camera bracket can be

adjusted left and right, and the positioning screw can be fixed after adjustment.